Battery for Juiced Bikes RipCurrent S Gen 1 (48V standard / 52V option, G1 pack)

2 likely matches, 1 known mismatch. Change part

No verified replacement found yet

Nothing is confirmed for this bike yet. The parts below look like matches on the specs, but no manual, manufacturer page or seller states the fit. Check the connector and the voltage on your own bike before ordering.

Know the right reference? Tell us and we will verify and publish it.

Probably compatible

GreenBikeKit lists RipCurrent S among G1-pack models and the G1 case/2-pin connector matches, but the seller could not confirm it will run a 48V-controller (2018) bike; only 52V-controller RCS units are a likely fit.

Illustration

GreenBikeKit Juiced 52V 19.2Ah / 21Ah G1 Replacement Battery

Fits
Juiced Bikes · RipCurrent S · Gen 1 (48V standard / 52V option, G1 pack)
Part
BatteryAftermarketGreenBikeKit
Reference
Juiced 52V G1 rebuild

Part page

Voltage
52 V
Capacity
19.2 Ah
Connector
G1 case, 2-pin discharge connector with integrated key lock and charging port, plug-and-play with original G1 mount
Pins
2
UL certified
Not certified

Samsung INR18650-32E (19.2Ah) or -35E (21Ah); 393mm long, 5.6kg; G1 = no handle; seller says G1/G2 bases differ, order same generation as original. Optional 58.8V 120-240W chargers +$25-40. Forum note: seller could not confirm it will run a 48V-controller bike. Capacity as stated: 19.2 / 21 Ah

Source: GreenBikeKit Juiced 52V G1 rebuild page + EBR forum thread

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy · from $386

  • GreenBikeKit
    AftermarketIn stock
    Checked Sep 8, 2026
    $386
    View offer

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.

Probably compatible

Owners on the EBR forum state the 2018 RipCurrent S shipped with a 48V 13Ah pack; no Juiced manual or spec sheet was found for this generation, so the fit is not confirmed by an official or technical source.

Illustration

Juiced RipCurrent S 2018 48V 13Ah Battery

Fits
Juiced Bikes · RipCurrent S · Gen 1 (48V standard / 52V option, G1 pack)
Part
BatteryOEMJuiced Bikes
Reference
48V 13Ah

Part page

Voltage
48 V
Capacity
13 Ah
UL certified
Not certified

Forum only (EBR forums, 2025): 2018 Gen 1 RipCurrent S shipped with a 48V 13Ah standard battery, 52V optional at purchase; a Juiced-branded G2 52V 19Ah pack would not power the 48V bike at all.

Source: EBR forum thread '2018 Gen 1 Ripcurrent S battery upgrade' (2025): 2018 RCS shipped with 48V 13Ah standard pack

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy

No seller listed yet for this part.

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.

Looks similar, does not fit

Not compatible

Forum user installed a Juiced-branded G2 52V 19Ah pack on a 2018 48V RipCurrent S and the bike would not power up at all (48V controller).

Illustration

Juiced 52V 19.2Ah G2 Battery Pack

Fits
Juiced Bikes · RipCurrent S · Gen 1 (48V standard / 52V option, G1 pack)
Part
BatteryOEMJuiced Bikes
Reference
52-Volt G2 Battery Pack

Part page

Voltage
52 V
Capacity
19.2 Ah
Connector
Juiced downtube slide-in mount, G2 base (differs from G1 base); XLR charge port; power connector same as G1
UL certified
Yes (UL 2849 / 2271)

Velowave listing: 'SGS Certified to UL 2271', IP65, integrated Apple AirTag compartment, lockable power button, LED battery level meter, ergonomic carry handle, concealed dual fuse compartment, programmable BMS. FTH listing: LG 18650 3200mAh cells, 84 cells, 14S6P, XLR charger (sold separately). GreenBikeKit notes G2 has handle, different mounting base from G1; original uses 2x25A fuses. Sold by Juiced 2022-2024 for $399-$699 (Slickdeals title, not fetched).

Connector to check on your bike

  • XLR 3-pin
    charge port

Schematic of the connector family, drawn by Rankemo — not a photo of this part. Compare the shape and the pin count with the plug on your bike before ordering.

Source: EBR forum thread '2018 Gen 1 Ripcurrent S battery upgrade' (2025)

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem