Controller for Juiced Bikes RipCurrent S 52 V G2-battery era

2 possible matches. Change part

No verified replacement found yet

Nothing is confirmed for this bike yet. The parts below look like matches on the specs, but no manual, manufacturer page or seller states the fit. Check the connector and the voltage on your own bike before ordering.

Know the right reference? Tell us and we will verify and publish it.

Possible matches — not confirmed for this bike

Probably compatible

Seller names 'RipCurrent' but states some RipCurrent versions use the red L1121 motor connector and are NOT compatible; only bikes with the small Z910 motor plug fit.

Illustration

GreenBikeKit 52 V 750 W Replacement Controller for Juiced CrossCurrent / RipCurrent

Bike checked
Juiced Bikes · RipCurrent S · 52 V G2-battery era
Part
ControllerAftermarketGreenBikeKit
Reference
52V 750W controller suitable for Juiced CrossCurrent/RipCurrent

Part page

Detailsspecifications and connector
Voltage
52 V
Connector
Z910 small motor connector (NOT the red L1121 motor connector used on some RipCurrent)

$99.50, in stock; 52 V, 750 W, 125x50x29 mm, 0.55 kg. Seller: for Juiced e-bikes with small motor connectors (Z910 plug); some RipCurrent versions use red L1121 motor connectors and are not compatible - check your motor connector; contact seller about other Juiced controller variants. Amps, MOSFET count, sine-wave and display pairing not stated.

Source: GreenBikeKit Juiced CrossCurrent/RipCurrent controller 52V 750W

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy

In stock from $100 · 1 seller below

  • GreenBikeKit
    AftermarketIn stock
    Checked Sep 8, 2026
    $100
    View offer

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.

Probably compatible

EBR RipCurrent S review states a 25 A pure sine wave controller (~1,295 W peak) on the 52 V bike, matching the CCS2 manual's 9-transistor 25 A FOC controller, but no source states that the RipCurrent S unit carries the same part number.

Illustration

Juiced 52 V 25 A 9-Transistor Sine Wave FOC Controller (CrossCurrent S2 / RipCurrent S)

Bike checked
Juiced Bikes · RipCurrent S · 52 V G2-battery era
Part
ControllerOEMJuiced Bikes
Reference
9 Transistor / 25 Amp Peak sine wave FOC controller

Part page

Detailsspecifications and connector
Voltage
52 V
Output
25 A
Connector
XT60 (battery)

2019 CrossCurrent S2 manual spec table: '9 Transistor / 25 Amp Peak', 'Sine wave FOC', '1,300 Watts peak power @ 25A', 'Customized tuning algorithm', 'Thermally managed', '48V LED light output', 'Overboost function', 'Fully potted resistant construction', 'Cruise control', 'Walk function', 'XT60 connectors', 'Firmware upgradable'. Pairs with the Juiced Advanced Matrix LCD (52 V). Controller mounting location is not stated in the CCS2 manual. EBR RipCurrent S review: 25 A pure sine wave controller (updated from 20 A), ~1,295 W peak. Juiced no longer publishes a product page for this controller.

Connector to check on your bike

  • XT60
    battery

Schematic of the connector family, drawn by Rankemo — not a photo of this part. Compare the shape and the pin count with the plug on your bike before ordering.

Source: EBR RipCurrent S review (updated Dec 2024)

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy

No seller listed yet for this part.

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.