Controller for Lectric XP Step-Thru 1.0

2 possible matches. Change part

No verified replacement found yet

Nothing is confirmed for this bike yet. The parts below look like matches on the specs, but no manual, manufacturer page or seller states the fit. Check the connector and the voltage on your own bike before ordering.

Know the right reference? Tell us and we will verify and publish it.

Possible matches — not confirmed for this bike

Probably compatible

XP 1.0 and XP Step-Thru 1.0 share one Lectric user manual (same 48 V 10.4 Ah system), but the forum thread discusses step-over XP 1.0 bikes only.

Illustration

Lectric XP 1.0 controller (OEM, 48 V)

Bike checked
Lectric eBikes · Lectric XP Step-Thru · 1.0
Part
ControllerOEMLectric eBikes
Reference
No public part number

Part page

Detailsspecifications and connector
Voltage
48 V
Connector
Deans T-plug (battery), Julet (motor)

Lectric's XP/XP Step-Thru 1.0 manual gives no controller spec. EBR forum owners describe the stock XP 1.0 controller as using Julet motor connector, Deans T-plug battery connector and SM-type display/accessory connectors spliced to waterproof plugs; Lectric sold replacement controllers for about $70 plus shipping (support only, not on the web store). Owners replaced it with a KT 25 A sine-wave controller + KT-LCD8S display (needs XT60 battery adapter).

Connectors to check on your bike

  • Deans T-plug
    battery
  • Julet
    motor

Schematic of the connector family, drawn by Rankemo — not a photo of this part. Compare the shape and the pin count with the plug on your bike before ordering.

Source: Lectric help center: shared 'XP and XP Step-Thru 1.0' manual

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy

No seller listed yet for this part.

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.

Probably compatible

Seller names only XP1.0/XP2.0 (step-over). Step-Thru 1.0 shares the XP 1.0 manual and 48 V system, but no published source states the step-thru fit.

Illustration

Replacement Controller (from ElectricAllWheel controller + M5 display kit, Lectric XP 1.0/2.0 fit) 48 V 18 A

Bike checked
Lectric eBikes · Lectric XP Step-Thru · 1.0
Part
ControllerAftermarketElectricAllWheel
Reference
No public part number

Part page

Detailsspecifications and connector
Voltage
48 V
Output
18 A
Connector
T-plug (battery); 5-pin Julet green (display)
Pins
5
Protocol
M5 display, 5-pin Julet

Controller side of the kit already recorded as display 'lectric-xp-1-0-2-0-m5-display-controller-electricallwheel'. Brushless hub-motor controller, rated DC 48 V, max current 18 A +/-1, low-voltage cutoff DC 39 V +/-1, T-plug battery lead, must be used with the supplied M5 4-button display (5-pin Julet green). 'Not intended for separation of use'; ancillary functions of aftermarket controller may not work; throttle becomes unlocked. Sine-wave/square not stated; motor connector not stated. Sold only as a kit ($65).

Connectors to check on your bike

  • Deans T-plug
    battery
  • Julet 5-pin
    display

Schematic of the connector family, drawn by Rankemo — not a photo of this part. Compare the shape and the pin count with the plug on your bike before ordering.

Source: ElectricAllWheel kit page (XP1.0/2.0 only) + shared Lectric XP/XP Step-Thru 1.0 manual

Last verified Sep 10, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy

Out of stock everywhere we checked · last recorded price $65

  • ElectricAllWheel
    AftermarketOut of stock
    Checked Sep 8, 2026

    Select this variant on ElectricAllWheel: Replacement Controller (from ElectricAllWheel controller + M5 display kit, Lectric XP 1.0/2.0 fit) 48 V 18 A

    $65
    See listing

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.