Controller for Lectric XP Step-Thru 3.0

3 likely matches. Change part

No verified replacement found yet

Nothing is confirmed for this bike yet. The parts below look like matches on the specs, but no manual, manufacturer page or seller states the fit. Check the connector and the voltage on your own bike before ordering.

Know the right reference? Tell us and we will verify and publish it.

Probably compatible

Seller says 'Lectric XP 3.0' without distinguishing step-over/step-thru; both share manual V1.4 and the same 48V system.

Illustration

Replacement Controller (Throttle Unlocked) Lectric XP 3.0 fit, 48V 10A/20A

Fits
Lectric eBikes · Lectric XP Step-Thru · 3.0
Part
ControllerAftermarketElectricAllWheel
Reference
No public part number

Part page

Voltage
48 V
Output
20 A

Rated voltage 48V, rated current 10A, max current 20A, low-voltage protection 39V, throttle voltage 1.2-4.4V; for brushless motor systems; enables full throttle across all 5 PAS levels. Sold as 'a replacement for the stock controller' of the XP 3.0. Connectors, sine-wave and display pairing not stated on the page.

Source: ElectricAllWheel XP3.0-fit controller page + shared XP 3.0 / Step-Thru 3.0 manual

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy · from $60

  • ElectricAllWheel
    AftermarketOut of stock
    Checked Sep 8, 2026

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.

Probably compatible

Seller says 'Lectric XP 3.0' / 'Lectric 3.0' without distinguishing step-over/step-thru; both share manual V1.4 and the same 48V system.

Illustration

Lectric 3.0 Controller Replacement (Unlock Speed) 48V 20A

Fits
Lectric eBikes · Lectric XP Step-Thru · 3.0
Part
ControllerAftermarketElectric Display Replacement
Reference
No public part number

Part page

Voltage
48 V
Output
20 A
Connector
OEM-style direct-fit connectors

48V, max current 20A, aluminum housing, 'OEM-style, direct fit' plug-and-play connectors, throttle unlocked across PAS 0-5. Page disclaimer: 'THIS IS NOT A LECTRIC BRANDED CONTROLLER'. Designed specifically for the Lectric XP 3.0.

Source: Electric Display Replacement XP 3.0 controller page + shared XP 3.0 / Step-Thru 3.0 manual

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy · from $199

  • Electric Display Replacement (electricdisplayreplacement.com)
    AftermarketIn stock
    Checked Sep 8, 2026

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.

Probably compatible

XP 3.0 and XP Step-Thru 3.0 share the same Lectric manual (V1.4) and electrical system, but the forum thread does not say whether the bikes were step-over or step-thru.

Illustration

Lectric XP 3.0 controller (OEM, 48V 20A, temperature-protected)

Fits
Lectric eBikes · Lectric XP Step-Thru · 3.0
Part
ControllerOEMLectric eBikes
Reference
No public part number

Part page

Voltage
48 V
Output
20 A

XP 3.0 manual V1.4 gives no controller spec; Lectric 'Behind the Design XP 3.0' blog only says the controller is temperature-protected. Owners on ebikesforum (Dec 2023) received the Lectric-supplied replacement controller + display for the XP 3.0 and report current-based PAS: PAS1 4A, PAS2 8A, PAS3 12A, PAS4 16A, PAS5 20A (max 20A). Controller sits in the down tube below the crank; display-to-controller cable unwrapped there. Not sold on lectricebikes.com (support order only).

Source: Lectric XP 3.0 / XP Step-Thru 3.0 manual V1.4 (shared)

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy

No seller listed yet for this part.

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.