Controller for Lectric XP (step-over) XP 1.0

1 verified match · none listed in stock today · 1 possible match. Change part

Compatible — verified

Compatibility is documented in the manufacturer's manual or technical specifications.

Illustration

Replacement Controller (from ElectricAllWheel controller + M5 display kit, Lectric XP 1.0/2.0 fit) 48 V 18 A

Bike checked
Lectric eBikes · Lectric XP (step-over) · XP 1.0
Part
ControllerAftermarketElectricAllWheel
Reference
No public part number

Part page

Detailsspecifications and connector
Voltage
48 V
Output
18 A
Connector
T-plug (battery); 5-pin Julet green (display)
Pins
5
Protocol
M5 display, 5-pin Julet

Controller side of the kit already recorded as display 'lectric-xp-1-0-2-0-m5-display-controller-electricallwheel'. Brushless hub-motor controller, rated DC 48 V, max current 18 A +/-1, low-voltage cutoff DC 39 V +/-1, T-plug battery lead, must be used with the supplied M5 4-button display (5-pin Julet green). 'Not intended for separation of use'; ancillary functions of aftermarket controller may not work; throttle becomes unlocked. Sine-wave/square not stated; motor connector not stated. Sold only as a kit ($65).

Connectors to check on your bike

  • Deans T-plug
    battery
  • Julet 5-pin
    display

Schematic of the connector family, drawn by Rankemo — not a photo of this part. Compare the shape and the pin count with the plug on your bike before ordering.

Source: ElectricAllWheel 'Replacement Controller and Display (Lectric XP2.0 & XP1.0 Fit)': 'Connectors and specifications fit for Lectric XP2.0, XP1.0'

Last verified Sep 10, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy

Out of stock everywhere we checked · last recorded price $65

  • ElectricAllWheel
    AftermarketOut of stock
    Checked Sep 8, 2026

    Select this variant on ElectricAllWheel: Replacement Controller (from ElectricAllWheel controller + M5 display kit, Lectric XP 1.0/2.0 fit) 48 V 18 A

    $65
    See listing

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.

Possible matches — not confirmed for this bike

Probably compatible

Owner reports on the EBR forum describe this as the stock XP 1.0 controller; Lectric publishes no controller specification, so this is not confirmed by an official or technical source.

Illustration

Lectric XP 1.0 controller (OEM, 48 V)

Bike checked
Lectric eBikes · Lectric XP (step-over) · XP 1.0
Part
ControllerOEMLectric eBikes
Reference
No public part number

Part page

Detailsspecifications and connector
Voltage
48 V
Connector
Deans T-plug (battery), Julet (motor)

Lectric's XP/XP Step-Thru 1.0 manual gives no controller spec. EBR forum owners describe the stock XP 1.0 controller as using Julet motor connector, Deans T-plug battery connector and SM-type display/accessory connectors spliced to waterproof plugs; Lectric sold replacement controllers for about $70 plus shipping (support only, not on the web store). Owners replaced it with a KT 25 A sine-wave controller + KT-LCD8S display (needs XT60 battery adapter).

Connectors to check on your bike

  • Deans T-plug
    battery
  • Julet
    motor

Schematic of the connector family, drawn by Rankemo — not a photo of this part. Compare the shape and the pin count with the plug on your bike before ordering.

Source: EBR forum thread 'Replacement controller options?' (Lectric XP 1.0 owners): stock controller connectors and Lectric $70 replacement

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy

No seller listed yet for this part.

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.