Controller for Lectric XP (step-over) XP 3.0

2 verified options, 1 likely match, 1 known mismatch. Change part

Compatible — verified

Listed by the source as fitting this generation.

Illustration

Replacement Controller (Throttle Unlocked) Lectric XP 3.0 fit, 48V 10A/20A

Fits
Lectric eBikes · Lectric XP (step-over) · XP 3.0
Part
ControllerAftermarketElectricAllWheel
Reference
No public part number

Part page

Voltage
48 V
Output
20 A

Rated voltage 48V, rated current 10A, max current 20A, low-voltage protection 39V, throttle voltage 1.2-4.4V; for brushless motor systems; enables full throttle across all 5 PAS levels. Sold as 'a replacement for the stock controller' of the XP 3.0. Connectors, sine-wave and display pairing not stated on the page.

Source: ElectricAllWheel 'Replacement Controller (Throttle Unlocked) (Lectric XP3.0 Fit)': 'Compatible with Lectric XP 3.0', replacement for the stock controller

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy · from $60

  • ElectricAllWheel
    AftermarketOut of stock
    Checked Sep 8, 2026
    $60
    View offer

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.

Compatible — verified

Listed by the source as fitting this generation.

Illustration

Lectric 3.0 Controller Replacement (Unlock Speed) 48V 20A

Fits
Lectric eBikes · Lectric XP (step-over) · XP 3.0
Part
ControllerAftermarketElectric Display Replacement
Reference
No public part number

Part page

Voltage
48 V
Output
20 A
Connector
OEM-style direct-fit connectors

48V, max current 20A, aluminum housing, 'OEM-style, direct fit' plug-and-play connectors, throttle unlocked across PAS 0-5. Page disclaimer: 'THIS IS NOT A LECTRIC BRANDED CONTROLLER'. Designed specifically for the Lectric XP 3.0.

Source: Electric Display Replacement 'Lectric 3.0 Controller Replacement (Unlock Speed)': designed specifically for Lectric XP 3.0, OEM-style direct-fit connectors

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy · from $199

  • Electric Display Replacement (electricdisplayreplacement.com)
    AftermarketIn stock
    Checked Sep 8, 2026
    $199
    View offer

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.

Probably compatible

Owner reports on the ebikesforum thread describe the controller Lectric supplied for the XP 3.0; Lectric publishes no controller specification, so this is not confirmed by an official or technical source.

Illustration

Lectric XP 3.0 controller (OEM, 48V 20A, temperature-protected)

Fits
Lectric eBikes · Lectric XP (step-over) · XP 3.0
Part
ControllerOEMLectric eBikes
Reference
No public part number

Part page

Voltage
48 V
Output
20 A

XP 3.0 manual V1.4 gives no controller spec; Lectric 'Behind the Design XP 3.0' blog only says the controller is temperature-protected. Owners on ebikesforum (Dec 2023) received the Lectric-supplied replacement controller + display for the XP 3.0 and report current-based PAS: PAS1 4A, PAS2 8A, PAS3 12A, PAS4 16A, PAS5 20A (max 20A). Controller sits in the down tube below the crank; display-to-controller cable unwrapped there. Not sold on lectricebikes.com (support order only).

Source: ebikesforum thread 'New controller offered by Lectric for the xp 3.0' (Dec 2023): Lectric-supplied XP 3.0 replacement controller, PAS 4/8/12/16/20A

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem

Where to buy

No seller listed yet for this part.

Notify me when this part is back in stock or the price drops

One email per change, no newsletter. Unsubscribe with one click.

Did this part work on your bike?

No owner has reported on this one yet.

Looks similar, does not fit

Not compatible

Seller states the kit fits XP1.0/2.0 only and sells a separate XP3.0-fit controller; page reviews report it does not fit XP 3.0.

Illustration

Replacement Controller (from ElectricAllWheel controller + M5 display kit, Lectric XP 1.0/2.0 fit) 48V 18A

Fits
Lectric eBikes · Lectric XP (step-over) · XP 3.0
Part
ControllerAftermarketElectricAllWheel
Reference
No public part number

Part page

Voltage
48 V
Output
18 A
Connector
T-plug (battery); 5-pin Julet green (display)
Pins
5
Protocol
M5 display, 5-pin Julet

Controller side of the kit already recorded as display 'lectric-xp-1-0-2-0-m5-display-controller-electricallwheel'. Brushless hub-motor controller, rated DC 48V, max current 18A +/-1, low-voltage cutoff DC 39V +/-1, T-plug battery lead, must be used with the supplied M5 4-button display (5-pin Julet green). 'Not intended for separation of use'; ancillary functions of aftermarket controller may not work; throttle becomes unlocked. Sine-wave/square not stated; motor connector not stated. Sold only as a kit ($65).

Connectors to check on your bike

  • Deans T-plug
    battery
  • Julet 5-pin
    display

Schematic of the connector family, drawn by Rankemo — not a photo of this part. Compare the shape and the pin count with the plug on your bike before ordering.

Source: ElectricAllWheel kit page + separate 'Replacement Controller (Lectric XP3.0 Fit)' listing

Last verified Sep 8, 2026 · 0 owners confirmed, 0 reported a problem